The Rachael Dark Cognac Leather Headboard Cushion Set

Each set is handmade here in NC with old-school techniques and craftsmanship by a fine furniture manufacturer.  Shown here, you see the queen, king & twin headboard cushions mounted above a standard queen, king & twin size beds.  

Rich deep cognac-colored leather covers the fronts, sides, and 3/4 of the back. The remainder of the back is finished in muslin with a zipper in case you want to remove the 100% Polyester filled inserts to wash them OR, wash down your headboard...that's right...

What's beautiful about our new leather is that it's SEALED. We went with this leather for the consistency of color and the fact that it will not scratch or stain. This leather can be washed with soap and water and will not change color. 

Twin Details: 

• ONE single cushion that is 39” Wide x  3” Deep (thick) x 19.5" High 
• Straps are 2" long from the top of the cushion to the crease of the strap. 
  

Full Details:

• Each cushion is approximately 28" Wide x 3" Deep (thick) x 19.5" High. 
• Straps are 2" long from the top of the cushion to the crease of the strap. 
  

Queen Details:

• Each cushion is approximately 32" Wide x 3" Deep (thick) x 19.5" High. 
• Straps are 2" long from the top of the cushion to the crease of the strap. 
  

King Details:

• Each cushion is 39” Wide x  3” Deep (thick) x 19.5" High 
• Straps are 2.5" long from the top of the cushion to the crease of the strap when they’re not hanging. 
  

California King Details: 

• Each cushion is 35” Wide x  3” Deep (thick) x 19.5" High 
• Straps are 2.5" long from the top of the cushion to the crease of the strap when they’re not hanging. 
  

IMPORTANT INFO: 

• We highly recommend that you wait until you have your set of cushions before you hang your rod. 
• Each set is made to order and will be shipped to you in approximately 4-8 weeks from the order date. We will notify you of tracking via email as soon as they ship! 
• Does NOT include hanging rod or hanging hardware; any rod suggestions given are simply recommendations to be used as a starting point
• As pictured, the cushions hang approximately 21" from the 1.5" round rod we used in these photos. Your hanging length could be different based on the width of the rod you choose. 
• Mounting your rod(s) into studs is the most secure option, if using drywall anchors make sure they are properly rated for the weight of the cushions and rod
• PLEASE NOTE: As with many wall decor items, the quality of your mounting hardware selection and installation is your responsibility
• FINAL SALE: Made to order & cannot be returned/exchanged

Using a French Drapery Rod such as these below will give your headboard cushions a flush-to-the-wall feel. 

French Drapery Rod Ideas

French Drapery Rod Ideas